Multi-patient, 8-pin to 9-pin D-sub adapter cable, 3 m (9.8 ft)
Pulse oximetry supplies
Multi-patient, 8-pin to 9-pin D-sub adapter cable, 3 m (9.8 ft)
Pulse oximetry supplies
Designed for use with Philips SpO₂ monitors and sensors, the M1943AL adapter cable is 3 m (9.8 ft) in length and features a D-sub connector. It adapts 9-pin sensors to 8-pin sockets. It can be used with these sensors: M1131A, M1132A, M1133A, M1134A, M1140A, M1191T, M1192T, M1193T and M1196T.
Cable length supports versatile placement
Adapts 9-pin sensors to 8-pin sockets
Features
Adapts 9-pin sensors to 8-pin sockets
Use the M1943 A and M1943AL cable whenever you need to adapt a 9-pin sensor to an 8-pin socket.
Long cable length
3 m (9.8 ft) cable length. The long cable adapts to a variety of room configurations
Specifications
- SpO2 Adapter Cable
- Cable Length
- 3.0 m (9.8')
- Number of Pins
- 8-Pin
- Sensor Compatibility
- Philips
- Product details
- Use with Non-Philips Healthcare Equipment
- No
- Product Category
- SpO2
- Use with Philips Healthcare Equipment
- 861290, 863063, 863064, 863065, 863066, 863068, 863071, 863072, 863073, 863074, 863077, 863080, 863081, 863082, 863085, 863086, 863087, 863088, 863264, 863265, 863266, 863276, 863277, 863278, 863279, 865350, 865351, M1020B, M2703A, M2704A, M2705A, M3000A, M3001A, M3002A, M8102A, M8105A, M8105AT, M8105AS
- Product Type
- Adapter Cable
- CE Certified
- Yes
- Single-Patient Use OR Multi-Patient Use
- Multi-Patient Use
- Package Weight
- .300
- Not manufactured with natural rubber latex
- Yes
- Packaging Unit
- 1 cable
- Sterile OR Non-Sterile
- Non-Sterile
- Minimum Shelf Life
- None
- Use with Other Supplies
- M1131A; M1132A; M1133A; M1134A; M1191T; M1192T; M1193T; M1196T
Recommended products
- The disposable Philips M1131A adult and pediatric clip sensor is made with a soft, semi-rigid silicone body. Manufactured without latex, it clips securely on any finger except the thumb on patients weighing more than 20 kg (44 lbs).
- The Philips M1132A infant wrap sensor is a low-adhesive, single-patient use SpO₂ sensor. Manufactured without latex and made of a soft yet durable fabric that is designed to be gentle on the skin, it can be used on fingers or toes of infants ranging from 3 - 10 kg (6.6 – 22 lbs).
- The Philips M1133A pulse oximetry sensor delivers continuous, noninvasive measurement of arterial oxygen saturation. Designed for multi-day, single-patient use, the M1133A wrap sensor is made of soft and flexible material and is manufactured without latex. It can be placed around the hand or foot to measure pulse oximetry on patients weighing less than 3 kg (6.6 lbs), as well as on the big toe or thumb of children from 10-20 kg (22-44 lbs), and on any finger except the thumb on patients over 40 kg (88 lbs).
- The Philips M1191T SpO₂ glove sensor features a mid-point connector for efficient transfer from a bedside to a transport or mobile patient monitor. It is designed for use on the fingers of adults greater than 50 kg (110 lbs). This durable, comfortable sensor is manufactured without latex and supports cost-effective oxygen saturation measurement.
- The reusable Philips M1196T adult clip sensor effectively measures pulse oximetry on adults and children weighing more than 40 kg (88 lbs). It is manufactured without latex. This sensor features a 90 cm (35.4 in) cable length and connects to 12-pin devices via M1900B adapter cable and connects to 8-pin devices via M1943A or M1943AL adapter cables and can be used with M4787A extension cable or validated 9-pin devices.
- The IntelliVue Pulse Oximetry Module is for use with IntelliVue Patient Monitors MP40-MP90 and MX500-MX850. The module allows non-invasive measurement of arterial oxygenation saturation using light transmitted through tissue.
Disclaimer
Product may not be available in all geographies, please check with your Philips representative for complete portfolio availability.